Heating + Air
Do you need a new Heat Pump system? Is your current system in need of repair? Maybe you just need a tune-up to get your system running smoothly again. Whatever you need, our Comfort Advisors and NATE Certified technicians are here to help. Our experts will keep your home cool, and all of our services come with a warranty and 100% satisfaction guarantee.
Colorado summers can be tough on older and low performing systems. Annual air conditioning tuneups will prepare your system for summer heat, keeping your family cool and comfortable. Our NATE Certified technicians will complete a 21-point spring and summer heat pump safety check and tune-up, ensuring your heat pump is running safely and efficiently throughout the summer months. Our tune up and inspection is designed with summer in mind. This 21-point check will:
- Save money on utility bills
- Extend the life of the unit
- Lower the risk of breakdowns
- Increase efficiencies
Interested in a deal?
In our 21-Point Check, our expert technicians will inspect the following:
- Return Air WB
- Return Air DB
- Supply Air DB
- Delta T
- Condensate Drain Flow
- Blower Amperage
- Test Capacitor
- Voltage to Furnace
- Voltage to Board
- Condenser Coil Condition
- Inspect Evaporative Coil
- Furnace Safety Check
- Calculate Super Heat
- Indoor Coil Air Flow
- Ignition System
- Furnace Disconnect
- Suction Pressure
- Calibrate Gauges
- Liquid Line Pressure/Temp
- OD Disconnect
- Fan & Compressor Amps
*Includes Surface Cleaning and visual Inspection of any components and standard filter for furnace.
Heat pump Repair
Heat pumps are built to last. But just like a car, a little TLC can go a long way, and improve the longevity and efficiency of your Denver area heat pump. Frequent maintenance such as a tune-up will serve you well, but when those inexplicable instances happen where your heat pump stops working, our repair experts are here for you.
Our NATE Certified technicians will get the job done right, and if you should experience any further problems, even after we’ve made a repair, we offer a 100% satisfaction guarantee so you can rest assured we will fix the problem.
Interested in a deal?
Common signs that may indicate it’s time for an heat pump repair:
If you notice any of these signs, please contact us immediately.
Not only does our fully NATE Certified team and years of experience set us apart, we’ve also got you covered with repair financing over $500 for qualified buyers, including zero down and 18 months zero interest.
Heat Pump Installation
Whether you’re investing in a heat pump system for the first time or need to replace an existing system, it’s important to choose the right system for your home. You will want to balance factors like upfront cost, energy efficiency, warranty, and operating costs based on the needs of your home. Having a system that meets your needs paired with our professional installation will ensure you are getting the best value for your money.
High-efficiency solutions for your home are only as efficient as the Quality Installation techniques used. A Quality Installation helps make your heat pump more efficient, extends the lift of the system, can lower your electric bill and increase your home’s comfort.
When it is time to have a new heat pump installed in your home, the first step is to ensure that you select a system that matches your specific needs. There are four main factors to consider in this process.
Sizing Your Heat PumpWe will perform a heat load calculation to make sure your new heat pump is sized to your home's exact specifications. This will ensure that your furnace will efficiently and consistently heat your home.
Efficiency RatingBalancing the cost of purchase and installation with the ongoing cost of operation can be an important deciding factor in choosing a new heat pump. A higher initial investment for a high-efficiency heat pump will reduce operational costs in the future. Some of these costs can be offset with rebates and tax credits. Our comfort advisors can present a variety of options to match your needs and budget.
Code RequirementsPermits are required for most projects. We are licensed and insured in every jurisdiction & pull permits for every installation where required. This ensures proper installation and your safety by installing to local code specifications and standards that are signed off by a local inspector.
InstallationWhich company you choose to install your heat pump has a big impact on the efficiency and life of the system. Our technicians are NATE trained and certified and receive ongoing training to keep up with the latest trends and technology. Every employee is background checked and screened for your family's safety and peace of mind.
Interested in a deal?
As an Xcel Energy Top Rebate Installing Partner we passed 100% of inspections in 2018 and 2019. This matters because according to Xcel, nearly 50% of heating and cooling systems are incorrectly installed.
When is the right time to replace your system? Here are some common signs:
- Seer rating is 13 or lower
- Your system is over 10 years old
- Frequent breakdowns
- Your system uses R22 freon
- Your home is noticeably uncomfortable
- The cost of repair is 50% or more of a new A/C
Brands We Carry:
- We carry the top heat pump brands rated by Consumer Reports
- All of our products are made in the USA
- Backed by the best warranties and guarantees in the industry
|High efficiency ASHP with Quality Installation |
Efficiency Minimums: 15+ SEER, 12.5+ EER
Efficiency Minimums: 18+ SEER, 12.5+ EER, 10.5+ HSPF with Quality Installation
|up to $1000|
Get a free system replacement consultation
Our solutions are built from a thorough evaluation and custom recommendations for your budget, comfort and convenience.